Manual Setup

If you can't (or prefer not to) run the automatic setup, you can follow the instructions below to configure the Sentry SvelteKit SDK in your application. This guide is also useful to adjust the pre-set configuration if you used the installation wizard for automatic setup.

Install

npm install @sentry/sveltekit --save

If you're updating your Sentry SDK to the latest version, check out our migration guide to learn more about breaking changes.

Configure

The Sentry SDK needs to be initialized and configured in three places: On the client-side, server-side and in your Vite config.

Client-side Setup

If you don't already have a client hooks file, create a new one in src/hooks.client.(js|ts).

At the top of your client hooks file, import and initialize the Sentry SDK as shown in the snippet below. See the Basic Options page to view other SDK configuration options. Also, add the handleErrorWithSentry function to the handleError hook:

import * as Sentry from "@sentry/sveltekit";

Sentry.init({
  dsn: "https://examplePublicKey@o0.ingest.sentry.io/0",

  // We recommend adjusting this value in production, or using tracesSampler
  // for finer control
  tracesSampleRate: 1.0,

  // Optional: Initialize Session Replay:
  integrations: [Sentry.replayIntegration()],
  replaysSessionSampleRate: 0.1,
  replaysOnErrorSampleRate: 1.0,
});

const myErrorHandler = ({ error, event }) => {
  console.error("An error occurred on the client side:", error, event);
};

export const handleError = Sentry.handleErrorWithSentry(myErrorHandler);

// or alternatively, if you don't have a custom error handler:
// export const handleError = handleErrorWithSentry();

Server-side Setup

If you don't already have a server hooks file, create a new one in src/hooks.server.(js|ts).

At the top of your server hooks file, import and initialize the Sentry SDK as shown in the snippet below. See the Basic Options page to view other SDK configuration options. Add the handleErrorWithSentry function to the handleError hook and add the Sentry request handler to the handle hook. If you're already using your own handler(s), use SvelteKit's sequence function to add the Sentry handler before your handler(s).

import * as Sentry from "@sentry/sveltekit";

Sentry.init({
  dsn: "https://examplePublicKey@o0.ingest.sentry.io/0",

  // We recommend adjusting this value in production, or using tracesSampler
  // for finer control
  tracesSampleRate: 1.0,
});

const myErrorHandler = ({ error, event }) => {
  console.error("An error occurred on the server side:", error, event);
};

export const handleError = Sentry.handleErrorWithSentry(myErrorHandler);
// or alternatively, if you don't have a custom error handler:
// export const handleError = handleErrorWithSentry();

export const handle = Sentry.sentryHandle();
// Or use `sequence`:
// export const handle = sequence(Sentry.sentryHandle(), yourHandler());

Vite Setup

Add the sentrySvelteKit plugins to your vite.config.(js|ts) file so the Sentry SDK can apply build-time features. Make sure that it is added before the sveltekit plugin:

import { sveltekit } from "@sveltejs/kit/vite";
import { sentrySvelteKit } from "@sentry/sveltekit";

export default {
  plugins: [sentrySvelteKit(), sveltekit()],
  // ... rest of your Vite config
};

The sentrySvelteKit() function adds Vite plugins to your Vite config to:

• Automatically upload source maps to Sentry
• Automatically instrument load functions for tracing

Source Maps Upload

By default, sentrySvelteKit() will add an instance of the Sentry Vite Plugin, to upload source maps for both server and client builds. This means that when you run a production build (npm run build), source maps will be generated and uploaded to Sentry, so that you get readable stack traces in your Sentry issues.

However, you still need to specify your Sentry auth token as well as your org and project slugs. There are two ways to set them.

You can set them as environment variables, for example in a .env file:

• SENTRY_ORG your Sentry org slug
• SENTRY_PROJECT your Sentry project slug
• SENTRY_AUTH_TOKEN your Sentry auth token (can be obtained from the Organization Token Settings)
• SENTRY_URL your Sentry instance URL. This is only required if you use your own Sentry instance (as opposed to https://sentry.io).

Or, you can set them by passing a sourceMapsUploadOptions object to sentrySvelteKit, as seen in the example below. All available options are documented at the Sentry Vite plugin repo.

SENTRY_AUTH_TOKEN=sntrys_YOUR_TOKEN_HERE

Using the sourceMapsUploadOptions object is useful if the default source maps upload doesn't work out of the box, for instance, if you have a customized build setup or if you're using the SDK with a SvelteKit adapter other than the supported adapters.

Overriding SvelteKit Adapter detection

By default, sentrySvelteKit will try to detect your SvelteKit adapter to configure source maps upload correctly. If you're not using one of the supported adapters or the wrong one is detected, you can override the adapter detection by passing the adapter option to sentrySvelteKit:

import { sveltekit } from "@sveltejs/kit/vite";
import { sentrySvelteKit } from "@sentry/sveltekit";

export default {
  plugins: [
    sentrySvelteKit({
      adapter: "vercel",
    }),
    sveltekit(),
  ],
  // ... rest of your Vite config
};

Disable Source Maps Upload

You can disable automatic source maps upload in your Vite config:

import { sveltekit } from "@sveltejs/kit/vite";
import { sentrySvelteKit } from "@sentry/sveltekit";

export default {
  plugins: [
    sentrySvelteKit({
      autoUploadSourceMaps: false,
    }),
    sveltekit(),
  ],
  // ... rest of your Vite config
};

If you disable automatic source maps upload, you must explicitly set a release value in your Sentry.init() configs. You can also skip the sentry-cli configuration step below.

Optional Configuration

The points explain additional optional configuration or more in-depth customization of your Sentry SvelteKit SDK setup.

Auto-Instrumentation

The SDK primarily uses SvelteKit's hooks to collect error and performance data. However, SvelteKit doesn't yet offer a hook for universal or server-only load function calls. Therefore, the SDK uses a Vite plugin to auto-instrument load functions so that you don't have to add a Sentry wrapper to each function manually.

Auto-instrumentation is enabled by default when you add the sentrySvelteKit() function call to your vite.config.(js|ts). However, you can customize the behavior, or disable it entirely. If you disable it you can still manually wrap specific load functions with the withSentry function.

Customize Auto-instrumentation

By passing the autoInstrument option to sentrySvelteKit you can disable auto-instrumentation entirely, or customize which load functions should be instrumented:

import { sveltekit } from "@sveltejs/kit/vite";
import { sentrySvelteKit } from "@sentry/sveltekit";

export default {
  plugins: [
    sentrySvelteKit({
      autoInstrument: {
        load: true,
        serverLoad: false,
      },
    }),
    sveltekit(),
  ],
  // ... rest of your Vite config
};

Disable Auto-instrumentation

If you set the autoInstrument option to false, the SDK won't auto-instrument any load functions. You can still manually instrument specific load functions.

import { sveltekit } from '@sveltejs/kit/vite';
import { sentrySvelteKit } from '@sentry/sveltekit';

export default {
  plugins: [
    sentrySvelteKit({
      autoInstrument: false;
    }),
    sveltekit(),
  ],
  // ... rest of your Vite config
};

Configure Client-side fetch Instrumentation

The sentryHandle function you added to your handle hook in hooks.server.ts during server-side setup injects an inline <script> tag into the HTML response of the server. This script attempts to proxy all client-side fetch calls, so that fetch calls inside your load functions are captured by the SDK. However, if you configured CSP rules to block inline fetch scripts by default, this script will be blocked by the browser. To enable the script, you need to add an exception for the sentryHandle script:

First, specify your nonce in the fetchProxyScriptNonce option in your sentryHandle call:

// Add the nonce to the <script> tag:
export const handle = sentryHandle({
  fetchProxyScriptNonce: "<your-nonce>",
});

Then, adjust your SvelteKit CSP configuration:

const config = {
  kit: {
    csp: {
      directives: {
        "script-src": ["nonce-<your-nonce>"],
      },
    },
  },
};

Disable Client-side fetch Proxy Script

If you do not want to inject the script responsible for instrumenting client-side load calls, you can disable injection by passing injectFetchProxyScript: false to sentryHandle:

export const handle = sentryHandle({ injectFetchProxyScript: false });

Note that if you disable the fetch proxy script, the SDK will not be able to capture spans for fetch calls made in your load functions on the client. This also means that potential spans created on the server for these fetch calls will not be connected to the client-side trace.

Manual Instrumentation

Instead or in addition to Auto Instrumentation, you can manually instrument certain SvelteKit-specific features with the SDK:

Instrument load Functions

SvelteKit's universal and server load functions are instrumented automatically by default. If you don't want to use load auto-instrumentation, you can disable it, and manually instrument specific load functions with the SDK's load function wrappers.

Universal load Functions

Use the wrapLoadWithSentry function to wrap universal load functions declared in +page.(js|ts) or +layout.(js|ts)

import { wrapLoadWithSentry } from "@sentry/sveltekit";

export const load = wrapLoadWithSentry(({ fetch }) => {
  const res = await fetch("/api/data");
  const data = await res.json();
  return { data };
});

Server-only load Functions

Or use the wrapServerLoadWithSentry function to wrap server-only load functions declared in +page.server.(js|ts) or +layout.server.(js|ts)

import { wrapServerLoadWithSentry } from "@sentry/sveltekit";

export const load = wrapServerLoadWithSentry(({ fetch }) => {
  const res = await fetch("/api/data");
  const data = await res.json();
  return { data };
});

Instrument Server Routes

You can also manually instrument server (API) routes with the SDK. This is useful if you have custom server routes that you want to trace or if you want to capture error() calls within your server routes:

import { wrapServerRouteWithSentry } from "@sentry/sveltekit";

export const GET = wrapServerRouteWithSentry(async () => {
  // your endpoint logic
  return new Response("Hello World");
});